DO NOT KEEP THIS COIN! This coin is part of a worldwide mission to raise awareness of bikes (both motorized and human powered) on the roadways. Please respect this coins mission and try to move it to another cache as soon as possible...
T-CLOCK — PRE-RIDE CHECKLIST
INSPECT THE MOTORCYCLE PRIOR TO EACH RIDE
T – Tires and Wheels
- Tire Condition - Tread depth, weathering, bulges, imbedded objects, uneven wear
- Air Pressure - Check cold. Normal loss is a pound or two a week
- Spokes - Check for broken, bent or missing spokes
- Rims - Check for out of round and out of true
- Wheel Bearings - No free play and no growl when spinning
C – Cables and Controls
- Throttle, Clutch, Brake Cables - Correct free play, smooth operation, no fraying
- Shifter - Securely mounted, operates smoothly
- Brakes - Operate smooth, don’t drag excessively, pads greater than minimum thickness
- Kill Switch - Shuts off engine when moved to the “off” position
L – Lights and Electronics
- Battery - Terminals tight/clean, water level OK, secured, proper routing of breather tube
- Wiring - None frayed or pinched, especially important at steering head
- Switches - Make sure all operate correctly (kill switch, headlight, brakes, signals, horn)
- Lighting - Check light bulbs (headlights, tali/brake, markers, signals, instruments)
- Horn - Proper mounting and insure that it works
O – Oil and Fuel
- Leaks - Check for leaks (coolant, brake/clutch fluid, engine oil, final drive)
- Levels - Check oil level on center stand when cold
- Air Filter - No blockage, clean and not torn
- Fuel Lines - Not bent, leaking or cracked and properly secured with clamps
- Brake/Clutch - Fluid Correct levels, no leakage, no hose deterioration
C – Chain and Chassis
- Drive Chain/Belt - Check for wear, proper adjustment, lubrication, master link clip
- Sprockets - Check for wear
- Chain Guard - Securely mounted
- Foot Pegs - Should fold up and be securely mounted
- Steering Head Bearings - No détente in middle, no binding, smooth operation
- Swing Arm Bushings - Check for movement at swing arm pivot
- Accessory Mounts - Secure, not missing bolts or interference with steering/suspension
- Cotter Pins & Clips - No missing clips, also check where mechanical cables attach
- Frame - Look for cracks, accessory mounts, steering head & engine cradle
- Shocks and Forks - Check for leaks, smooth operation, air pressure, alignment
K – Kickstand
- Side Stand - Not bent, retracts fully, proper ground clearance
- Center Stand - Not bent, retracts fully, proper ground clearance
|